waveshare 1.5inch OLED Display Module 128x128 Pixels, SPI/I2C Interface 16 Gray Scale 3.3V / 5V Operating Voltage, Compatible with Arduin/Raspberry Pi/STM32, etc

Price: [price_with_discount]
(as of [price_update_date] - Details)

[ad_1] 1.5inch OLED display Module, 128x128 pixels, 16 gray scale, SPI/I2C interface

Features
Ultra-narrow bezel, conpact size, with onboard voltage translator
Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate
Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

Online Development Resources /User Manual ://bit.ly/3Dr8yIU

Specifications
Operating voltage: 3.3V / 5V
DISPLAY PANEL: OLED
Resolution : 128 × 128 pixels
Communication Interface : 4-wire SPI / I2C
Driver: SSD1327
PIXEL SIZE : 0.185 × 0.185mm
Display size: 26.86 × 26.86mm
Module size: 44.5 × 37.0mm

Pinout Description
VCC—Power input (3.3V / 5V input)
GND —Ground
DIN —Data input
SCL —Clock input
CS —Chip select
DC —Data/command signal selection
RST —Reset signal

FAQ 1. Question:Why does the OLED module not turn on when it is connected to the power supply?
Answer: OLED does not have a backlight, and the display is self-illuminating. Only connect VCC and GND, the OLED will not light up. Program control is required to brighten the OLED.

2. Question:What should I pay attention to when using this OLED module?
Answer: 1. Be careful not to connect the power supply in reverse.
2. The same picture cannot be displayed for a long time, otherwise it will produce afterimages and cause damage to the OLED.

1.5inch OLED display Module, 128x128 pixels, 16 gray scale
Embedded SSD1327 driver chip, SPI / I2C Communication
Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate
Ultra-narrow bezel, conpact size, with onboard voltage translator
Comes with Online Development Resources (examples for Raspberry Pi/Arduino/STM32)
[ad_2]